The required firmware version for DP/DM 3000 is 'R01.08.32' or higher The required firmware version for DP/ DM 4000 and SL radios is «R02.00.00» and higher.
Specify Metric 500 for MOTOTRBO Radio Network ConnectionĪll MOTOTRBO radios and repeaters working in the radio system must use the same firmware version. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties and then Advanced. In the network connection properties of MOTOTRBO, which is created automatically at connecting the control stations to the computer via USB, disable all the interfaces except for TCP/IP v4. Make sure MOTOTRBO Control Station is installed properly on the computer where the radioserver is installed (MOTOTRBO Radio connection should appear in the state Connected in the Network Connection Properties window). (Right-click on Computer icon and select Manage. In the list of System Toolsselect Device Manager abd click on Network Adapters and see MOTOTRBO Radio connected)Ģ. MOTOTRBO Radio in Network Connections List MOTOTRBO Radio should appear in Device Manager Window. Make sure that MOTOTRBO Control Station is installed properly on the computer where SmartPTT Radioserver Configurator is installed. But for some reason I cannot read it in MOTOTRBO CPS Software I connected Control Station via USB cable to the PC.